machinery in stock

25-60 PTO HORSEPOWER REQUIREMENT
WEIGTH: 400KG
152MM (6") MAXIMUM IN FEED DIAMETER
TWIN HYDRAULIC IN FEED ROLLER
AUTO IN FEED CONTRIL
2X 100MM (4") FULLY HARDENED CHIPPING BLADES
PRECESSES UPTO 4 T/HOUR
DESIGNED AND MANUFACTURED IN THE UK

Just Traded
2007 New Holland BR740A Cropcutter
Variable chamber baler. Makes 4ft x 5ft (max) bales
Rotor cutter knives
2.1m pick up
Adjustable floating wind guard
Bale Command Plus control box
Operator's manual
Spare net wrap box on back
Good tyres
Always shedded
Never washed, only blown down
Approx 12,000 bales only

1998 Ford/New Holland 6640
7353 engine hours
90 Horsepower
Four wheel drive
Air conditioned cab
2 rear hydraulic remotes
Howard level lift front end loader with 3rd function & bucket
Workshop inspected and engine rebuilt with new pistons & liners

- Eagle 24m Boom
- 5000 L Tank
- Single Axel
- 4 Sections with Section Filters
- 364 Pump Hydraulic Drive  ( 2 yrs old )
- Pony Flow Fresh Water Fill Meter
- 60 L Granny Pot
- Trailer Suspension
- HC5500 Rate Controller
- Manual Fence line Jet Right Side
- 18.4 38 Tyres
- Mud Guards
- Enviro Drum Kit

4024 Hardi Navigator with Trailer Suspension & Adjustable Axle Track.
4000 Litre Tank
24 Meter Hyd Lift & Fold Boom.
John Deere Rate Controller fitted
Pto driven 364 Hardi Pump done 1 season
Vacuum Granni Pto.

24 Run
4 Bin Machine
Double SPrung 620 EO Tynes
Double Shoot System
Comes with Farmscan Hectare Meter.
Note: Harrows at Rear NOT included.

2016 Fendt 209 Vario TMS
90Hp AGCO Power engine
Fendt Vario transmisison
Fendt/ALO 265 Level Lift FEL & 3rd Circuit fitted with new 2.1m ALO 4in1 bucket
3 rear hydrauilc remotes
A/C Cab
UHF
6161 hrs
Very tidy tractor

Refubished openers with new discs, bushes, bearings and points
New following harrow tines fitted
4m working width
152mm (6") spacings
Folds for transport
Single disc openers
Independent press wheels
Following harrows
Cat 3 two point hitch
ISO Bus control
Done 4297.72Ha

2010 FENDT 714 & 4 X 85 Cargo Loader
6500 hrs
Fully Seviced by Wiensers Walla
LED Lights
New Cab Lining
New Front Tyres
Original Owner
Feed Out Tractor Never Over Worked


Please Call
Bruce Lynch 0412869411 

Gleaner R75, 2445 Rotor Hrs, 3003 Eng Hours.
Late Model with 14 Inch Unloading Auger. Fieldstar Equipped.
Hyd Driven Spreader. Fitted with Dutch Industries Chaff Spreader.
Spread Width up to 36 ft. Feeder-House Capacity Mods Done.
Bison Rotor fitted.
Traded .
Been through Experienced Gleaner Workshop.
Sold New by us.

Just traded.
40 ft Fendt Superflow Front with Vertical Knives.
Fitted to Fendt 10T.
Unit no longer required due to change in field conditions for up coming season.
Front has harvested 1200 Hectares of Canola only.
Could be adapter to other brands of Combines.

Note: Comb Trailer not Included.