machinery in stock

WORKING WIDTH 2.55M
CAT2 THREE POINT HITCH
540 RPM PTO DRIVE LINE WITH OVERRUN CLUTCH
2.13M TRANSPORT WIDTH
5 DISCS, 2 BLADES PER DISC
MAKES 1.6M (APPROX) SWATH
REQURES APPROX 54HP

WORKING WIDTH 3.00M
CAT 2 THREE POINT HITCH
540 RPM PTO DRIVE LINE WITH OVER RUN CLUTCH
3.43M TRANSPORT WIDTH
6 DISCS WITH 2 BLADES PER DISC
MAKES 1.8M (APPROX) SWATHSREQUIRES APPROX 61HP

The hay rakes of the Magnum Evolution line are designed in such a way that adjustments are simple to accomplish.

A lever acting on a sprocket equipped with a locking mechanism enables the width of the swathe to be adjusted easily and rapidly from about 3’ (0.91 m) to 6’ (1.8 m). Alternatively, this function can be performed by an optional hydraulic device enabling the adjustment of the swathe directly from the tractor. Each rake wheel has its own spring and adjustment chain enabling the correct pressure on the ground to be obtained regardless of the crop and of the type of ground.

In order to adapt to extreme field conditions, hay rakes must be solid and sturdy. This is why the drawbar and the rake wings have been made using a large lattice framework of structural tubing to make them tough and fully reliable over time, however hard they are made to work.

Despite their size, these machines are easy to handle and transport and very user-friendly.

FRONT MOUNT MOWER WITH TINE CONDITIONER
3.12M WORKING WIDTH
2.99M TRANSPORT WIDTH
CAT 2 THREE POINT LINKAGE MOUNT
1000 RPM PTO DRIVE LINE
6 DISCS, 2 BLADESPER DISC
3 DIMENTIONAL GROUND ADAPTATION
EX-DEMO UNIT

TINE CONDITIONER
3.1M WORKING WIDTH
2,5M TRANSPORT WIDTH
CAT 2 & 3 THREE POINT HITCH
1000 RPM PTO DRIVE LINE
6 DISCS, 2 BLADES PER DISC
MAKES SWATHS BETWEEN 0.8M - 2.3M
REQUIRES APPROX 85HP